Description
Included:
- 1x AR FCG
- 1x Safety Selector Detent
- 1x Safety Selector Detent Spring
- 1x Bolt Catch Plunger
- 1x Bolt Catch Spring
- x1 – AR500 0.119” Ejector
- x2 – Ball Bearings 4mm x10mm x4mm
- x4 – Orange Ender 3 bed springs (8mm OD 10mm Length)
- x1 – Magazine Catch Spring
- x1 – 1″ Rubber Hemisphere
- x3 – M3x30 (Feed Ramp, Ejector, Safety)
- x3 – M4x30 (Grip)
- x2 – M4 Washers (Grip)
- x1 – Hex Head M3X25 (Bolt Catch)
- x3 – M2x20 (Bolt Catch, Delay Retainers)
- x2 – M2X8 (Trigger Chassis)
- x2 – M2X16 (Mag Release Buttons)
- x1 – M4X14 (CH Hinge)
- x1 – M3x45 (Charging Handle)
- x4 – M4 Nut (Hinge, Takedown Bolt, Grip)
- x2 – M3 nuts
- x1 – M3x25 (Magazine Paddle)
- x1 – M3x20 (Bolt catch)
- x1 – M4x16 (Takedown Bolt)
- x1 – M5X14 (Gas Key)
- x2 – M4x20 rods (Bearing Pins) (or M4x25 bolts decapitated to 20mm)
- x1 – M3x6 set screw (headless)
- x1 – ¼”x1” Hex head bolt. If the head had text it needs to be ground off.
- x2 – ¼” Nuts
- x4 – 8-32 Nuts
- x2 – 8-32 x ½” Bolts (optional replacement for gas key bolts)
NOT Included:
- Printed Components
- 1x 9mm Barrel
- 1x 9mm BCG
- 1x Carbine Buffer Spring
- 1x AR-15 Carbine Buffer Weight (do not use a 9mm or extended buffer)
- 8-32 and 1/4 Threaded rods (depending on handguard length chosen)
